Watch your temps.the higher they go, the faster the fans will run, and draw more power away from the 187 watts you have available (with the power limit slider at 110%). The best way to test is with KBoost enabled, and voltage added. The stock bios on the FTW is terribly limiting. During load the fan ramps up to 60-75 which is about 2500-2750 RPM. This card only has one 8 pin plug which may hold back overclocking, though in theory it probably should not. Take a screenshot of the testing and post it if you'd like more help.I'd bet if you go much higher, you'll start seeing "PWR", "VREL" and "VOP" in that row. This is still a very good overclock, just not as good as what others can achieve on 970 GPUs with one 8 and an additional 6 pin power plug. Taking It To The Limit: Overclocking NVIDIAs GeForce GTX 970 980 Techgage. Use GPUz, and click on the "sensors" tab while you're testing. Gigabyte Gtx 970 4gb Graphics Cards Gddr5 256 Bit Gpu Video Card For Nvidia Geforce Gtx970 Gtx970-4gb Map Hdmi Dvi Cards Used - Graphics Cards - AliExpress. Anything above 1503 on my cards though, would start to "power limit" throttle. I was able to reach 1503 with the power target slider all the way up to 110% (187 watts) and the voltage slider up to reach 1.256v (roughly +56mv, depending on your card.anything above that on the slider won't do anything). I'm pretty surprised you haven't reached them already, and saw the clock rates throttling to keep it under.
Make sure to move the power target up to it's maximum as well, or you'll start running into the power limits (170 watts isn't very much). In fact, the most voltage you'll be able to get out of it with the slider is up to 1256mv (1.256v.this depends on the card a little bit, but it's limited to 1.262v in the stock bios.also not nearly enough to damage anything). The increases in voltage you'll get from Precision X will not come even close to damaging the card.
0 kommentar(er)
